|

The ONLY way to
ensure ALL your
drivers are 100% Alcohol-Free
- EVERY time they drive!
The AlcoDigital
Drivealyzer represents a real price-breakthrough for commercial
interlock devices. While not approved for judicial and offender
programme use, the device is nevertheless a fully US DoT approved,
commercial Breathalyzer-Immobilizer that offers the ultimate safety
device at a price previously unheard of.
Random testing is one way
of meeting your obligations under HSE legislation to ensure your
employees are fit for duty, but inevitably it can only check a fraction
of employees. And in the case of workers who do not start from a
single report centre, ONLY an immobilizer device such as the Drivealyzer
will ensure absolute compliance, every trip, every day.
Using the same
UK-made DART Fuel Cell sensor found in Lion's UK Police Breathalyzers,
Drivealyzer uses multiple Temperature, Humidity and Pressure sensors
ensure accurate, consistent and fraudulent-free testing and rolling
retests make absolutely sure it really WAS the driver who took the test.
Why so much cheaper?
Primarily because while the device still has anti-tamper logging
built-in, it isn't tested and approved to the same levels as judicial
interlocks used in offender programmes. But in such instances, an
individual has long-term, completely unsupervised opportunity to try and
circumvent the interlock system. In commercial applications, this is
very rarely the case; multiple drivers are often using the vehicles
and/or they are regularly into works garages for maintenance and
checking. The Drivealyzer is just as difficult to circumvent as a
normal vehicle alarm immobilizer, and as such easily exceeds the ability
of 99% of employees. Power interrupts, bypass detections, violations etc
are all logged in the data system to ensure reliable fraud-free
operation.
Installation and Calibration. One of the most expensive
issues with other Interlock Systems has always been the complex nature &
expense of the installation and the need for either the vehicle to be
driven to a specialist service centre, or for a representative to come
out to the vehicle. Both these issues have been resolved with the
Drivealyzer.
No more difficult to
install than a standard vehicle immobilizer, most installations take
less than an hour and can usually be done by in-house mechanics during
normal service routines.
And to ensure zero
vehicle down-time and minimal calibration costs, the handset is designed
to be simply unplugged and replaced every six months with a replacement,
calibrated handset. Costs are dramatically reduced from up to
£300/year of other interlocks to just £90 - and that includes a fully
serviced replacement handset, every six months - you don't even have to
buy the additional handset - it's provided as standard within the
maintenance contract.
Increase Sales,
Reduce Costs.....
Reduce Staff Costs
- the Drivealyzer monitors every start, every day - with none of the
staff and time costs associated with random testing programmes.
Generate extra
Business by demonstrating
your 100% commitment to driver safety, especially when bidding for
PSV work involving the carriage of children and local
authority business (in France it is now illegal to carry
under-18's on a PSV without an interlock having been fitted!)
Improve
Productivity - implementing an interlock programme often reduces
absenteeism and sickness rates as drivers reduce their alcohol
intake prior to a work duty.
|
Buy for
only
£595 -
or Rent for just £5/week!
Low in Price - but not low in
Performance

UK-made DART Sensor
- uses the same Fuel Cell
as used in Police-Approved "Lion" Breathalyzers
Data Logging for up
to 8,000 entries
Simple Installation
- usually installed by
in-house maintenance mechanics
User-Configurable
software options - delay periods, violations reset, trigger points,
multi-stop function etc... the Drivealyzer is custom-configured to YOUR
needs
100% Reliability -
the Drivealyzer passed a rigorous,
90-day Accuracy, Reliability certification process by the US DoT with
flying colours - see details left
Hot-Swappable Handsets
- for Zero down-time
and maintenance costs a fraction of other systems
- just £90 per year covers twice yearly calibrations, full maintenance
and replacement warranty!
Rolling Retest,
Humidity, Temperature and Pressure sensors to prevent fraudulent (or
"assisted") use
Remote Reset by PIN
code entry for
emergency restart or false alarms

Purchase £
+
VAT

Rent -
£/quarter
+
VAT

|
Technical
Specification
|
Analytical
principle |
Electrochemical
DrägerSensor in 1/4" technology for alcohol analysis |
|
Measurement
precision |
Standard deviation
±0.008
mg/L or ±1.7
% of the measurement value. The higher value applies. Drift:
typically < 0.6 % of the measurement value/month |
|
READY Time |
approx. 6 s |
|
Voltage |
12v - Starter
relay may switch up to 48 V, 12 V subnet for instrument supply
necessary |
|
Quick menu |
PIN protected:
Last 10 tests, Last calibration date, measurement settings,
total tests to date |
|
Approvals |
Radio interference
(Directive 95/54/EC and ECE Regulation No.10) NHTSA compliant
General German Operating Permission (Allgemeine
Betriebserlaubnis) |
|
Size |
approx. 140 mm x
70 mm x 30 mm / 5.5” x 2.8” x 1.2” |
|
Weight |
Handset approx.
175 g (0.4 oz) Control unit approx. 320 g (0.7 oz) |
Certifications
and Approvals
|

In one of the most
thorough INDEPENDENT testing procedures developed for
breathalyzer equipment, the Drivealyzer was subjected to an
intensive testing programme over a THREE MONTH period to
prove it's accuracy, reliability and consistency as well as
it's ability to operate in all temperatures and conditions
in order to gain DoT approval. It passed with 100% !!
Read the Full Report & Results - Click
Here |
What it Costs
| Purchase Price |
£ |
|
Rental Option - including
maintenance |
£5/wk |
Software Setup & Configuration
Handset Calibration/Initialisation |
£
£
|
Annual Maintenance Contract
- includes twice yearly calibrations,
full maintenance and warranty. |
£
pa |
Mouthpieces (pack of 100)
Mouthpieces (box of 500) |
£
£
|
|
Not just for Vehicles....
Dangerous Machinery,
Chemical Plant, or other High-Risk activity?
While the Drivealyzer has
been primarily designed for use in vehicles, it is easily
configured for use with dangerous machinery such as Saws,
Presses - Lift mechanisms, Cranes or even access doors to
sensitive or high-risk areas. Email or all us on
0844 585 5050 with your requirements and we will discuss how
we can configure a device to suit your needs. |
|